List Of Steps To Use A Tile Leveling System Effectively

After reading a lot about a tile leveling system and its benefits, there’s no doubt that you’ll be pretty keen to use one. As you take on your next tiling job, you order the best tile leveling system but before carrying out the process, you must know how to use it properly. Even though all of the products included in a system work the same way, you should know how to use them. So, this article will provide you the basic steps with advice so that you can install the tiles.

1. First of all, you have to prepare the surface well so that you can install the tiles on it. By preparing the surface it means you have to make it flat as possible.

2. Take the tile adhesive in enough amounts so that you can fix some tiles at a time on the surface.

3. Take some amount of adhesive on a tile with the help of the proper tool and place the tile on the surface before firmly pushing it in place.

4. Then, take two tile spacers and add them to each side of the tile that is exposed. Make sure that the base of the tile spacer must not be placed below the added tile.

5. Now, carefully lay the next tile according to the spacers used on the tiles installed before.

6. Depending on the tile system you’re using, slide the leveling wedges or clips into a hole that you’ll find on the top of the spacer. If you push them firmly, you can make sure of the fact the tiles will stay leveled at a common height.

7. If you don’t know how to use wedges or clips, you can use caps. Fit the caps on the top of the spacer and rotate them until you feel like they are settled well on the tiles. Observing the tiles will be beneficial so that you can make sure that there is no lippage.

8. Then add more spacers and keep repeating this step but keep observing the alignment of the tiles even if you’re using caps, clips, or wedges.

9. Repeat this process until all of the tiles are laid properly and then leave the adhesive to dry. You can take help from product guidelines to figure out the time until which the adhesive is dried.

10. Once the adhesive is dried remove the tools that you used to align the tiles well.

11. Grout between the tiles and you’re done.

If you’re planning to buy tile leveling clips or wedges, you can consider the products offered by “Bato Trade”. Using their experience of decades, the firm has been providing innovative products to install tiles effectively. They provide leveling spacers, installation pliers, grout line products, and more. Their products are affordable, easy to use, and effective enough to produce flat floors and walls.